In reply to chr_sue:
– Compiling module tvs_apbi2c_top
** Error: ** while parsing file included at …/tvs_apbi2c_env/tvs_apbi2c_env_pkg.sv(33)
** while parsing file included at …/tvs_apbi2c_top/test_list/tvs_apbi2c_test_pkg.sv(34)
** at …/tvs_apbi2c_top/tb_top/tvs_apbi2c_top.svh(32): Illegal use of ‘automatic’ for variable declaration (clock).
THIS IS THE ERROR
interface tvs_apb_intf;
// Interface Clk
logic p_clk;
// Interface address Declaration
logic [31:0] p_addr;
// Interface Data Declaration
logic [31:0] p_wdata;
logic p_write;
logic [31:0]p_rdata;
logic p_enable;
logic p_ready;
logic p_sel;
logic p_resetn;
logic p_silverr;
logic int_rx;
logic int_tx;
THIS IS MY INTERFACE
module tvs_apbi2c_top;
// timing information
timeunit 1ns;
timeprecision 1ps;
reg clock=0;
always #125 clock = ~clock ;
//Instance of the interface
tvs_apb_intf apb_intf();
// instance of the interface
tvs_i2c_intf i2c_intf();
i2c DUV(.PCLK(clock),
.PRESETn(reset),
.PADDR(apb_intf.p_addr),
.PWDATA(apb_intf.p_wdata),
.PWRITE(apb_intf.p_write),
.PSELx(apb_intf.p_sel),
.PENABLE(apb_intf.p_enable),
.PREADY(apb_intf.p_ready),
.PSLVERR(apb_intf.p_silverr),
.INT_TX(apb_intf.int_tx),
.INT_RX(apb_intf.int_rx),
.PRDATA(apb_intf.p_rdata),
//I2C OUTPUT
.SDA_ENABLE(),
.SCL_ENABLE(),
.SDA(),
.SCL());
THIS IS THE TOP MODULE WHERE IT SHOWS THE ERROR