The ovm_report_object provides an interface to the OVM reporting facility. Through this interface, components issue the various messages that occur during simulation. Users can configure what actions are taken and what file(s) are output for individual messages from a particular component or for all messages from all components in the environment. Defaults are applied where there is no explicit configuration.
Most methods in ovm_report_object are delegated to an internal instance of an ovm_report_handler, which stores the reporting configuration and determines whether an issued message should be displayed based on that configuration. Then, to display a message, the report handler delegates the actual formatting and production of messages to a central ovm_report_server.
A report consists of an id string, severity, verbosity level, and the textual message itself. They may optionally include the filename and line number from which the message came. If the verbosity level of a report is greater than the configured maximum verbosity level of its report object, it is ignored. If a report passes the verbosity filter in effect, the report’s action is determined. If the action includes output to a file, the configured file descriptor(s) are determined.
| Actions | can be set for (in increasing priority) severity, id, and (severity,id) pair. They include output to the screen OVM_DISPLAY, whether the message counters should be incremented OVM_COUNT, and whether a $finish should occur OVM_EXIT. |
| Default Actions | The following provides the default actions assigned to each severity. These can be overridden by any of the set_*_action methods. |
OVM_INFO - OVM_DISPLAY OVM_WARNING - OVM_DISPLAY OVM_ERROR - OVM_DISPLAY | OVM_COUNT OVM_FATAL - OVM_DISPLAY | OVM_EXIT
| File descriptors | These can be set by (in increasing priority) default, severity level, an id, or (severity,id) pair. File descriptors are standard verilog file descriptors; they may refer to more than one file. It is the user’s responsibility to open and close them. |
| Default file handle | The default file handle is 0, which means that reports are not sent to a file even if an OVM_LOG attribute is set in the action associated with the report. This can be overridden by any of the set_*_file methods. |
| ovm_report_object | |||
| The ovm_report_object provides an interface to the OVM reporting facility. | |||
| Class Hierarchy | |||
| |||
| Class Declaration | |||
| |||
| new | Creates a new report object with the given name. | ||
| Reporting | |||
| ovm_report_info | |||
| ovm_report_warning | |||
| ovm_report_error | |||
| ovm_report_fatal | These are the primary reporting methods in the OVM. | ||
| Callbacks | |||
| report_info_hook | |||
| report_error_hook | |||
| report_warning_hook | |||
| report_fatal_hook | |||
| report_hook | These hook methods can be defined in derived classes to perform additional actions when reports are issued. | ||
| report_header | Prints version and copyright information. | ||
| report_summarize | Outputs statistical information on the reports issued by the central report server. | ||
| die | This method is called by the report server if a report reaches the maximum quit count or has an OVM_EXIT action associated with it, e.g., as with fatal errors. | ||
| Configuration | |||
| set_report_verbosity_level | This method sets the maximum verbosity level for reports for this component. | ||
| set_report_severity_action | |||
| set_report_id_action | |||
| set_report_severity_id_action | These methods associate the specified action or actions with reports of the given severity, id, or severity-id pair. | ||
| set_report_default_file | |||
| set_report_severity_file | |||
| set_report_id_file | |||
| set_report_severity_id_file | These methods configure the report handler to direct some or all of its output to the given file descriptor. | ||
| get_report_verbosity_level | Gets the verbosity level in effect for this object. | ||
| get_report_action | Gets the action associated with reports having the given severity and id. | ||
| get_report_file_handle | Gets the file descriptor associated with reports having the given severity and id. | ||
| ovm_report_enabled | Returns 1 if the configured verbosity for this object is greater than verbosity and the action associated with the given severity and id is not OVM_NO_ACTION, else returns 0. | ||
| set_report_max_quit_count | Sets the maximum quit count in the report handler to max_count. | ||
| Setup | |||
| set_report_handler | Sets the report handler, overwriting the default instance. | ||
| get_report_handler | Returns the underlying report handler to which most reporting tasks are delegated. | ||
| reset_report_handler | Resets the underlying report handler to its default settings. | ||
| get_report_server | Returns the ovm_report_server instance associated with this report object. | ||
| dump_report_state | This method dumps the internal state of the report handler. | ||
| new | Creates a new reporter instance with the given name. | ||
function new( string name = "" )
Creates a new report object with the given name. This method also creates a new ovm_report_handler object to which most tasks are delegated.
virtual function void ovm_report_info( string id, string message, int verbosity = OVM_MEDIUM, string filename = "", int line = 0 )
virtual function void ovm_report_warning( string id, string message, int verbosity = OVM_MEDIUM, string filename = "", int line = 0 )
virtual function void ovm_report_error( string id, string message, int verbosity = OVM_LOW, string filename = "", int line = 0 )
virtual function void ovm_report_fatal( string id, string message, int verbosity = OVM_NONE, string filename = "", int line = 0 )
These are the primary reporting methods in the OVM. Using these instead of $display and other ad hoc approaches ensures consistent output and central control over where output is directed and any actions that result. All reporting methods have the same arguments, although each has a different default verbosity:
| id | a unique id for the report or report group that can be used for identification and therefore targeted filtering. You can configure an individual report’s actions and output file(s) using this id string. |
| message | the message body, preformatted if necessary to a single string. |
| verbosity | the verbosity of the message, indicating its relative importance. If this number is less than or equal to the effective verbosity level (see <set_report_verbosity_level>), then the report is issued, subject to the configured action and file descriptor settings. Verbosity is ignored for warnings, errors, and fatals to ensure users do not inadvertently filter them out. It remains in the methods for backward compatibility. |
| filename/line | (Optional) The location from which the report was issued. Use the predefined macros, `__FILE__ and `__LINE__. If specified, it is displayed in the output. |
virtual function bit report_info_hook( string id, string message, int verbosity, string filename, int line )
virtual function bit report_error_hook( string id, string message, int verbosity, string filename, int line )
virtual function bit report_warning_hook( string id, string message, int verbosity, string filename, int line )
virtual function bit report_fatal_hook( string id, string message, int verbosity, string filename, int line )
virtual function bit report_hook( string id, string message, int verbosity, string filename, int line )
These hook methods can be defined in derived classes to perform additional actions when reports are issued. They are called only if the OVM_CALL_HOOK bit is specified in the action associated with the report. The default implementations return 1, which allows the report to be processed. If an override returns 0, then the report is not processed.
First, the hook method associated with the report’s severity is called with the same arguments as the given the report. If it returns 1, the catch-all method, report_hook, is then called. If the severity-specific hook returns 0, the catch-all hook is not called.
virtual function void report_header( OVM_FILE file = 0 )
Prints version and copyright information. This information is sent to the command line if file is 0, or to the file descriptor file if it is not 0. The ovm_root::run_test task calls this method just before it component phasing begins.
virtual function void report_summarize( OVM_FILE file = 0 )
Outputs statistical information on the reports issued by the central report server. This information will be sent to the command line if file is 0, or to the file descriptor file if it is not 0.
The run_test method in ovm_top calls this method.
virtual function void die()
This method is called by the report server if a report reaches the maximum quit count or has an OVM_EXIT action associated with it, e.g., as with fatal errors.
If this report object is an ovm_component and we’re in a task-based phase (e.g. run), then die will issue a global_stop_request, which ends the phase and allows simulation to continue to the next phase.
If not a component, die calls report_summarize and terminates simulation with $finish.
function void set_report_verbosity_level ( int verbosity_level )
This method sets the maximum verbosity level for reports for this component. Any report from this component whose verbosity exceeds this maximum will be ignored.
function void set_report_severity_action ( ovm_severity severity, ovm_action action )
function void set_report_id_action ( string id, ovm_action action )
function void set_report_severity_id_action ( ovm_severity severity, string id, ovm_action action )
These methods associate the specified action or actions with reports of the given severity, id, or severity-id pair. An action associated with a particular severity-id pair takes precedence over an action associated with id, which take precedence over an an action associated with a severity.
The action argument can take the value OVM_NO_ACTION, or it can be a bitwise OR of any combination of OVM_DISPLAY, OVM_LOG, OVM_COUNT, <OVM_STOP>, OVM_EXIT, and OVM_CALL_HOOK.
function void set_report_default_file ( OVM_FILE file )
function void set_report_severity_file ( ovm_severity severity, OVM_FILE file )
function void set_report_id_file ( string id, OVM_FILE file )
function void set_report_severity_id_file ( ovm_severity severity, string id, OVM_FILE file )
These methods configure the report handler to direct some or all of its output to the given file descriptor. The file argument must be a multi-channel descriptor (mcd) or file id compatible with $fdisplay.
A FILE descriptor can be associated with with reports of the given severity, id, or severity-id pair. A FILE associated with a particular severity-id pair takes precedence over a FILE associated with id, which take precedence over an a FILE associated with a severity, which takes precedence over the default FILE descriptor.
When a report is issued and its associated action has the OVM_LOG bit set, the report will be sent to its associated FILE descriptor. The user is responsible for opening and closing these files.
function int get_report_verbosity_level()
Gets the verbosity level in effect for this object. Reports issued with verbosity greater than this will be filtered out.
function int get_report_action( ovm_severity severity, string id )
Gets the action associated with reports having the given severity and id.
function int get_report_file_handle( ovm_severity severity, string id )
Gets the file descriptor associated with reports having the given severity and id.
function int ovm_report_enabled( int verbosity, ovm_severity severity = OVM_INFO, string id = "" )
Returns 1 if the configured verbosity for this object is greater than verbosity and the action associated with the given severity and id is not OVM_NO_ACTION, else returns 0.
See also get_report_verbosity_level and get_report_action, and the global version of ovm_report_enabled.
function void set_report_max_quit_count( int max_count )
Sets the maximum quit count in the report handler to max_count. When the number of OVM_COUNT actions reaches max_count, the die method is called.
The default value of 0 indicates that there is no upper limit to the number of OVM_COUNT reports.
function void set_report_handler( ovm_report_handler handler )
Sets the report handler, overwriting the default instance. This allows more than one component to share the same report handler.
function ovm_report_handler get_report_handler()
Returns the underlying report handler to which most reporting tasks are delegated.
function void reset_report_handler
Resets the underlying report handler to its default settings. This clears any settings made with the set_report_* methods (see below).
function ovm_report_server get_report_server()
Returns the ovm_report_server instance associated with this report object.
function void dump_report_state()
This method dumps the internal state of the report handler. This includes information about the maximum quit count, the maximum verbosity, and the action and files associated with severities, ids, and (severity, id) pairs.
The ovm_object class is the base class for all OVM data and hierarchical classes.
virtual class ovm_object extends ovm_void
The ovm_report_object provides an interface to the OVM reporting facility.
virtual class ovm_report_object extends ovm_object
Creates a new report object with the given name.
function new( string name = "" )
virtual function void ovm_report_info( string id, string message, int verbosity = OVM_MEDIUM, string filename = "", int line = 0 )
virtual function void ovm_report_warning( string id, string message, int verbosity = OVM_MEDIUM, string filename = "", int line = 0 )
virtual function void ovm_report_error( string id, string message, int verbosity = OVM_LOW, string filename = "", int line = 0 )
These are the primary reporting methods in the OVM.
virtual function void ovm_report_fatal( string id, string message, int verbosity = OVM_NONE, string filename = "", int line = 0 )
virtual function bit report_info_hook( string id, string message, int verbosity, string filename, int line )
virtual function bit report_error_hook( string id, string message, int verbosity, string filename, int line )
virtual function bit report_warning_hook( string id, string message, int verbosity, string filename, int line )
virtual function bit report_fatal_hook( string id, string message, int verbosity, string filename, int line )
These hook methods can be defined in derived classes to perform additional actions when reports are issued.
virtual function bit report_hook( string id, string message, int verbosity, string filename, int line )
Prints version and copyright information.
virtual function void report_header( OVM_FILE file = 0 )
Outputs statistical information on the reports issued by the central report server.
virtual function void report_summarize( OVM_FILE file = 0 )
This method is called by the report server if a report reaches the maximum quit count or has an OVM_EXIT action associated with it, e.g., as with fatal errors.
virtual function void die()
This method sets the maximum verbosity level for reports for this component.
function void set_report_verbosity_level ( int verbosity_level )
function void set_report_severity_action ( ovm_severity severity, ovm_action action )
function void set_report_id_action ( string id, ovm_action action )
These methods associate the specified action or actions with reports of the given severity, id, or severity-id pair.
function void set_report_severity_id_action ( ovm_severity severity, string id, ovm_action action )
function void set_report_default_file ( OVM_FILE file )
function void set_report_severity_file ( ovm_severity severity, OVM_FILE file )
function void set_report_id_file ( string id, OVM_FILE file )
These methods configure the report handler to direct some or all of its output to the given file descriptor.
function void set_report_severity_id_file ( ovm_severity severity, string id, OVM_FILE file )
Gets the verbosity level in effect for this object.
function int get_report_verbosity_level()
Gets the action associated with reports having the given severity and id.
function int get_report_action( ovm_severity severity, string id )
Gets the file descriptor associated with reports having the given severity and id.
function int get_report_file_handle( ovm_severity severity, string id )
Returns 1 if the configured verbosity for this object is greater than verbosity and the action associated with the given severity and id is not OVM_NO_ACTION, else returns 0.
function int ovm_report_enabled( int verbosity, ovm_severity severity = OVM_INFO, string id = "" )
Sets the maximum quit count in the report handler to max_count.
function void set_report_max_quit_count( int max_count )
Sets the report handler, overwriting the default instance.
function void set_report_handler( ovm_report_handler handler )
Returns the underlying report handler to which most reporting tasks are delegated.
function ovm_report_handler get_report_handler()
Resets the underlying report handler to its default settings.
function void reset_report_handler
Returns the ovm_report_server instance associated with this report object.
function ovm_report_server get_report_server()
ovm_report_server is a global server that processes all of the reports generated by an ovm_report_handler.
class ovm_report_server
This method dumps the internal state of the report handler.
function void dump_report_state()
The ovm_report_handler is the class to which most methods in ovm_report_object delegate.
class ovm_report_handler
Phases all components through all registered phases.
virtual task run_test ( string test_name = "" )
The ovm_component class is the root base class for OVM components.
virtual class ovm_component extends ovm_report_object
Convenience function for ovm_top.stop_request().
function void global_stop_request()