# \#UVM-RAL-systemverilog-ralmodelling

**URL:** https://verificationacademy.com/forums/tag/uvm-ral-systemverilog-ralmodelling/7464.md

[Latest](https://verificationacademy.com/forums/latest.md) · [Categories](https://verificationacademy.com/forums/categories.md) · [Tags](https://verificationacademy.com/forums/tags.md)

---

## [I cannot find any implementations of a class that extends uvm\_reg\_file](https://verificationacademy.com/forums/t/i-cannot-find-any-implementations-of-a-class-that-extends-uvm-reg-file/49909)

<div class="topic-metadata">

**Author:** [@Amira\_Atef](https://verificationacademy.com/forums/u/Amira_Atef)\
**Replies:** 1\
**Last updated:** [March 23, 2025, 11:09am UTC](https://verificationacademy.com/forums/t/i-cannot-find-any-implementations-of-a-class-that-extends-uvm-reg-file/49909 "2025-03-23T11:09:36Z")

</div>

I am trying to create the DPCD registers within the DisplayPort standard, and it’s divided into fields each consisting of 256, 8 bit registers. So I wanted to place each of those fields in a register file and instantiate…

---

## [In UVM RAL, I have 2 active agentS,only one adaptor. how to work 2 transaction in one adaptor?](https://verificationacademy.com/forums/t/in-uvm-ral-i-have-2-active-agents-only-one-adaptor-how-to-work-2-transaction-in-one-adaptor/44197)

<div class="topic-metadata">

**Author:** [@Rohith\_V](https://verificationacademy.com/forums/u/Rohith_V)\
**Replies:** 0\
**Last updated:** [December 29, 2023, 4:03pm UTC](https://verificationacademy.com/forums/t/in-uvm-ral-i-have-2-active-agents-only-one-adaptor-how-to-work-2-transaction-in-one-adaptor/44197 "2023-12-29T16:03:24Z")

</div>

In UVM RAL, I have 2 active agents,1 DUT with 2 sub-blocks each sub-block having 2 registers, and only one adaptor. how to work 2 transactions parallelly in one adaptor?

---

## [Comparison of RAL write and read data, i am doing a simple write and simple read, how/where can i compare, this data along with address and some of my registers fields are combination of R,W,RW,RMW..etc..,](https://verificationacademy.com/forums/t/comparison-of-ral-write-and-read-data-i-am-doing-a-simple-write-and-simple-read-how-where-can-i-compare-this-data-along-with-address-and-some-of-my-registers-fields-are-combination-of-r-w-rw-rmw-etc/42624)

<div class="topic-metadata">

**Author:** [@newbie\_342](https://verificationacademy.com/forums/u/newbie_342)\
**Replies:** 1\
**Last updated:** [October 30, 2023, 1:20pm UTC](https://verificationacademy.com/forums/t/comparison-of-ral-write-and-read-data-i-am-doing-a-simple-write-and-simple-read-how-where-can-i-compare-this-data-along-with-address-and-some-of-my-registers-fields-are-combination-of-r-w-rw-rmw-etc/42624 "2023-10-30T13:20:58Z")

</div>

Comparison of RAL write and read data, i am doing a simple write and simple read, how/where can i compare, this data along with address and some of my registers fields are combination of R,W,RW,RMW…etc…,

---

## [Problem in ral modelling for certain scenario](https://verificationacademy.com/forums/t/problem-in-ral-modelling-for-certain-scenario/41316)

<div class="topic-metadata">

**Author:** [@aravind\_B](https://verificationacademy.com/forums/u/aravind_B)\
**Replies:** 0\
**Last updated:** [February 25, 2023, 4:09am UTC](https://verificationacademy.com/forums/t/problem-in-ral-modelling-for-certain-scenario/41316 "2023-02-25T04:09:04Z")

</div>

I have a scenario where write/read happens to certain registers with single address. From firmware also, it is a single 32bit variable. Only RTL does different assignments from each slices. VHDL RTL register updating lo…

---

## [Access UVM Register Model organized in pages](https://verificationacademy.com/forums/t/access-uvm-register-model-organized-in-pages/40239)

<div class="topic-metadata">

**Author:** [@davidetiddia](https://verificationacademy.com/forums/u/davidetiddia)\
**Replies:** 0\
**Last updated:** [April 4, 2022, 3:30pm UTC](https://verificationacademy.com/forums/t/access-uvm-register-model-organized-in-pages/40239 "2022-04-04T15:30:19Z")

</div>

Hi all. I am developing an I2C VIP which should update the register model of the device based on the transactions on the bus (explicit prediction). The problem is the following: suppose the DUT has its registers organi…

---

## [How to access fields in encrypted UVM reg model](https://verificationacademy.com/forums/t/how-to-access-fields-in-encrypted-uvm-reg-model/40053)

<div class="topic-metadata">

**Author:** [@verific\_engi](https://verificationacademy.com/forums/u/verific_engi)\
**Replies:** 2\
**Last updated:** [February 11, 2022, 11:27pm UTC](https://verificationacademy.com/forums/t/how-to-access-fields-in-encrypted-uvm-reg-model/40053 "2022-02-11T23:27:06Z")

</div>

Hello all I have been given an encrypted reg model of design and was asked to go around and try to access fields. Is there any way or method in UVM to access the fields inside the reg model for env setup?

---

## [Is there any scripts to generate the UVM\_RAL using ralgen?](https://verificationacademy.com/forums/t/is-there-any-scripts-to-generate-the-uvm-ral-using-ralgen/39951)

<div class="topic-metadata">

**Author:** [@pullaraobeerelli](https://verificationacademy.com/forums/u/pullaraobeerelli)\
**Replies:** 1\
**Last updated:** [January 10, 2022, 8:15pm UTC](https://verificationacademy.com/forums/t/is-there-any-scripts-to-generate-the-uvm-ral-using-ralgen/39951 "2022-01-10T20:15:31Z")

</div>

hi all, i have uvm\_env without RAL. now am trying to update with RAL. am not aware, how to make uvm RAL using ralgen. in my design it has 200+ registers. i have word file with REG\_NAMES,RESET values …etc. could you s…

---

## [Does anyone have basic example of IPXACT IEEE Xml format for dual bus access?](https://verificationacademy.com/forums/t/does-anyone-have-basic-example-of-ipxact-ieee-xml-format-for-dual-bus-access/39548)

<div class="topic-metadata">

**Author:** [@desperadorocks](https://verificationacademy.com/forums/u/desperadorocks)\
**Replies:** 0\
**Last updated:** [September 10, 2021, 9:05pm UTC](https://verificationacademy.com/forums/t/does-anyone-have-basic-example-of-ipxact-ieee-xml-format-for-dual-bus-access/39548 "2021-09-10T21:05:24Z")

</div>

Hello ! Any good place to find example of IEEE IPXACT .xml for dual bus register access ? Have a scenario where some a block has two interface and both can access these registers. But the interface has different view/a…

---

## [Instantiating multiple uvm\_reg\_blocks inside top\_env](https://verificationacademy.com/forums/t/instantiating-multiple-uvm-reg-blocks-inside-top-env/39395)

<div class="topic-metadata">

**Author:** [@verific\_engi](https://verificationacademy.com/forums/u/verific_engi)\
**Replies:** 1\
**Last updated:** [August 2, 2021, 5:56pm UTC](https://verificationacademy.com/forums/t/instantiating-multiple-uvm-reg-blocks-inside-top-env/39395 "2021-08-02T17:56:36Z")

</div>

Hello all I am trying to instantiate uvm\_reg\_block in the environment. The problem is there are multiple reg\_blocks inside the reg memory file. Should I instantiate all reg\_blocks inside the top\_env or define them insid…

---

## [How to switch between RTL and GATE LEVEL paths wihtout updating build block/register model?](https://verificationacademy.com/forums/t/how-to-switch-between-rtl-and-gate-level-paths-wihtout-updating-build-block-register-model/39135)

<div class="topic-metadata">

**Author:** [@superUVM](https://verificationacademy.com/forums/u/superUVM)\
**Replies:** 4\
**Last updated:** [June 2, 2021, 6:32pm UTC](https://verificationacademy.com/forums/t/how-to-switch-between-rtl-and-gate-level-paths-wihtout-updating-build-block-register-model/39135 "2021-06-02T18:32:15Z")

</div>

add\_hdl\_path(“DUT”, “RTL”) and add\_hdl\_path(“DUT”, “GATES”); define hdl path for RTL and GATES. These are defined in build method. How do you switch between RTL or gatelevel simulation without updating reg model? Is …

---

## [UVM RAL access type](https://verificationacademy.com/forums/t/uvm-ral-access-type/39102)

<div class="topic-metadata">

**Author:** [@abhishek.khule.seagate.com](https://verificationacademy.com/forums/u/abhishek.khule.seagate.com)\
**Replies:** 4\
**Last updated:** [May 21, 2021, 12:10am UTC](https://verificationacademy.com/forums/t/uvm-ral-access-type/39102 "2021-05-21T00:10:27Z")

</div>

Hi, Is the UVM RAL access type (RO, WR, etc) for HW or SW? Can someone explain what is difference between HW and SW access to register and how does that work? Thanks!

---

## [Any open source script to generate UVM RAL Model From IPXACT register input?](https://verificationacademy.com/forums/t/any-open-source-script-to-generate-uvm-ral-model-from-ipxact-register-input/38780)

<div class="topic-metadata">

**Author:** [@desperadorocks](https://verificationacademy.com/forums/u/desperadorocks)\
**Replies:** 0\
**Last updated:** [March 5, 2021, 1:40am UTC](https://verificationacademy.com/forums/t/any-open-source-script-to-generate-uvm-ral-model-from-ipxact-register-input/38780 "2021-03-05T01:40:39Z")

</div>

Hello !! Is there any open source script etc. which is available where we can generate UVM RAL Model code from the IPXAC register input file ? Do see that the tool vendors provide that option for eg: ralgen or reg\_verif…

---

## [Check one register in each block using RAL](https://verificationacademy.com/forums/t/check-one-register-in-each-block-using-ral/38777)

<div class="topic-metadata">

**Author:** [@kesav\_abj](https://verificationacademy.com/forums/u/kesav_abj)\
**Replies:** 1\
**Last updated:** [March 4, 2021, 7:07pm UTC](https://verificationacademy.com/forums/t/check-one-register-in-each-block-using-ral/38777 "2021-03-04T19:07:59Z")

</div>

I need to check one register in a block , I coded as below class x\_sequnece extends uvm\_sequence uvm\_reg blk\_reg\[$\]; task x\_sequence :: do\_sequence() uvm\_reg\_block all\_reg\_blocks\[$\]; for (block\[i\])begin uvm\_reg\_si…

---

## [Register Modeling](https://verificationacademy.com/forums/t/register-modeling/38362)

<div class="topic-metadata">

**Author:** [@rabh](https://verificationacademy.com/forums/u/rabh)\
**Replies:** 10\
**Last updated:** [November 23, 2020, 2:57pm UTC](https://verificationacademy.com/forums/t/register-modeling/38362 "2020-11-23T14:57:04Z")

</div>

In case of register modelling, why is FRONTDOOR accessing considered convenient when compared to BACKDOOR accessing of CSR. Is it because in case of BACKDOOR accessing we require accessing of HDL paths which is a cumbers…

---

## [Read Method in UVM RAL](https://verificationacademy.com/forums/t/read-method-in-uvm-ral/38315)

<div class="topic-metadata">

**Author:** [@Malai\_21](https://verificationacademy.com/forums/u/Malai_21)\
**Replies:** 3\
**Last updated:** [November 8, 2020, 6:13pm UTC](https://verificationacademy.com/forums/t/read-method-in-uvm-ral/38315 "2020-11-08T18:13:14Z")

</div>

Hello all I just wanna know read API in the UVM RAL model works? Say for example, If I call “reg\_block.reg\_name.read(status,rdata)” in sequences, how the rdata value is getting updated.? which method in the RAL adaptor …

---

## [RAL MODELLING Registers](https://verificationacademy.com/forums/t/ral-modelling-registers/37923)

<div class="topic-metadata">

**Author:** [@gaurav.incise](https://verificationacademy.com/forums/u/gaurav.incise)\
**Replies:** 0\
**Last updated:** [August 7, 2020, 10:50am UTC](https://verificationacademy.com/forums/t/ral-modelling-registers/37923 "2020-08-07T10:50:17Z")

</div>

Q. As I am developing a VIP, as of now it will not have any DUT. So, I need to develop a fake DUT in BFM. For my VIP I have 2 agents MASTER and SLAVE. According to spec SLAVE will have 1400 Registers out of which approx.…
