# \#UPF

**URL:** https://verificationacademy.com/forums/tag/upf/5820.md

[Latest](https://verificationacademy.com/forums/latest.md) · [Categories](https://verificationacademy.com/forums/categories.md) · [Tags](https://verificationacademy.com/forums/tags.md)

---

## [Best way to waive one signal mismatching isolation value versus reset value](https://verificationacademy.com/forums/t/best-way-to-waive-one-signal-mismatching-isolation-value-versus-reset-value/49640)

<div class="topic-metadata">

**Author:** [@wesley.kirk](https://verificationacademy.com/forums/u/wesley.kirk)\
**Replies:** 0\
**Last updated:** [February 13, 2025, 8:04pm UTC](https://verificationacademy.com/forums/t/best-way-to-waive-one-signal-mismatching-isolation-value-versus-reset-value/49640 "2025-02-13T20:04:17Z")

</div>

New to power aware verification… I have a case where a FIFO output, which has not reset signal, is affecting an output port of a power domain where I have specified a clamp value. So, when power comes back up, and isola…

---

## [Difference between UPF instrumentation and Instantiation](https://verificationacademy.com/forums/t/difference-between-upf-instrumentation-and-instantiation/39723)

<div class="topic-metadata">

**Author:** [@subbireddy](https://verificationacademy.com/forums/u/subbireddy)\
**Replies:** 1\
**Last updated:** [October 21, 2021, 2:40am UTC](https://verificationacademy.com/forums/t/difference-between-upf-instrumentation-and-instantiation/39723 "2021-10-21T02:40:19Z")

</div>

for me conflict instrumentation and Instantiation, Please tell me difference between UPF instrumentation and UPF instantiation with example

---

## [We have two domain pd1 at low voltage and pd2 at high voltage, pd1 to pd2 connection has no level shifter, what kind of design bugs and power related bugs can be seen?](https://verificationacademy.com/forums/t/we-have-two-domain-pd1-at-low-voltage-and-pd2-at-high-voltage-pd1-to-pd2-connection-has-no-level-shifter-what-kind-of-design-bugs-and-power-related-bugs-can-be-seen/33720)

<div class="topic-metadata">

**Author:** [@sgthoppa](https://verificationacademy.com/forums/u/sgthoppa)\
**Replies:** 0\
**Last updated:** [November 17, 2017, 3:11am UTC](https://verificationacademy.com/forums/t/we-have-two-domain-pd1-at-low-voltage-and-pd2-at-high-voltage-pd1-to-pd2-connection-has-no-level-shifter-what-kind-of-design-bugs-and-power-related-bugs-can-be-seen/33720 "2017-11-17T03:11:26Z")

</div>

Design bugs could be improper logic conversion like logic high in pd1 getting sampled as a logic low in pd2, so signal transitions does not occur. But what about power bugs?

---

## [What type of RTL bugs can be caught using power verification?](https://verificationacademy.com/forums/t/what-type-of-rtl-bugs-can-be-caught-using-power-verification/33556)

<div class="topic-metadata">

**Author:** [@sgthoppa](https://verificationacademy.com/forums/u/sgthoppa)\
**Replies:** 2\
**Last updated:** [October 9, 2017, 2:49pm UTC](https://verificationacademy.com/forums/t/what-type-of-rtl-bugs-can-be-caught-using-power-verification/33556 "2017-10-09T14:49:26Z")

</div>

With power verification we can see if the chip functions normally after being powered up, by observing its isolation cell output, retention cells. But all this are related to UPF,are there any RTL bugs that can be caught…

---

## [Does Questa support Power aware simulation with two different UPF files to be applied to different disign hierarchy](https://verificationacademy.com/forums/t/does-questa-support-power-aware-simulation-with-two-different-upf-files-to-be-applied-to-different-disign-hierarchy/32247)

<div class="topic-metadata">

**Author:** [@San1](https://verificationacademy.com/forums/u/San1)\
**Replies:** 1\
**Last updated:** [September 12, 2016, 10:27am UTC](https://verificationacademy.com/forums/t/does-questa-support-power-aware-simulation-with-two-different-upf-files-to-be-applied-to-different-disign-hierarchy/32247 "2016-09-12T10:27:17Z")

</div>

Hi, Please let know whether questa supports running PA simulations where design has two different UPF files associated to different design modules? If yes, please guide on the run time options to be used for the same? …
