# \#timeout

**URL:** https://verificationacademy.com/forums/tag/timeout/5377.md

[Latest](https://verificationacademy.com/forums/latest.md) · [Categories](https://verificationacademy.com/forums/categories.md) · [Tags](https://verificationacademy.com/forums/tags.md)

---

## [Register model use problem](https://verificationacademy.com/forums/t/register-model-use-problem/39379)

<div class="topic-metadata">

**Author:** [@yangbo](https://verificationacademy.com/forums/u/yangbo)\
**Replies:** 2\
**Last updated:** [July 28, 2021, 7:33am UTC](https://verificationacademy.com/forums/t/register-model-use-problem/39379 "2021-07-28T07:33:29Z")

</div>

Hi，all I am using the write\_reg method of the register model, and the data can be seen on the output interface, but the write\_reg cannot be terminated and the subsequent code(read\_reg) cannot be executed. What is the re…

---

## [How to wait on a clocking block signal with timeout functionality](https://verificationacademy.com/forums/t/how-to-wait-on-a-clocking-block-signal-with-timeout-functionality/39119)

<div class="topic-metadata">

**Author:** [@RahulkumarBudhwani](https://verificationacademy.com/forums/u/RahulkumarBudhwani)\
**Replies:** 5\
**Last updated:** [May 28, 2021, 6:10pm UTC](https://verificationacademy.com/forums/t/how-to-wait-on-a-clocking-block-signal-with-timeout-functionality/39119 "2021-05-28T18:10:20Z")

</div>

When I have to wait for signal, I usually use statement like @(cb iff signal == condition) However, the issue in such statement is that the if the clocking block keeps waiting then it is harder to trace back. Therefore,…

---

## [Break out of while loop after certain timeout](https://verificationacademy.com/forums/t/break-out-of-while-loop-after-certain-timeout/33347)

<div class="topic-metadata">

**Author:** [@nik\_88](https://verificationacademy.com/forums/u/nik_88)\
**Replies:** 4\
**Last updated:** [August 1, 2017, 5:30pm UTC](https://verificationacademy.com/forums/t/break-out-of-while-loop-after-certain-timeout/33347 "2017-08-01T17:30:37Z")

</div>

Hi, I’m a newbie to OVM. I’m trying to break out of a while loop after a fixed timeout of 120us. Here is the loop that I have: while(signal\_val1 ==0) begin signal\_val1 == sla\_vpi\_get\_value\_by\_name (“blah”); end This…

---

## [Frontdoor sequence abort](https://verificationacademy.com/forums/t/frontdoor-sequence-abort/32505)

<div class="topic-metadata">

**Author:** [@dipling](https://verificationacademy.com/forums/u/dipling)\
**Replies:** 0\
**Last updated:** [November 7, 2016, 11:53am UTC](https://verificationacademy.com/forums/t/frontdoor-sequence-abort/32505 "2016-11-07T11:53:39Z")

</div>

Hi, I have a situation for which I don’t have a clean solution yet. Frontdoor sequence fetching handle of a TLM FIFO and performing a blocking .get() as part of the sequence. Testcase where a RAL access timeout is pro…

---

## [RAL frontdoor hang](https://verificationacademy.com/forums/t/ral-frontdoor-hang/32125)

<div class="topic-metadata">

**Author:** [@dipling](https://verificationacademy.com/forums/u/dipling)\
**Replies:** 0\
**Last updated:** [August 8, 2016, 11:24am UTC](https://verificationacademy.com/forums/t/ral-frontdoor-hang/32125 "2016-08-08T11:24:22Z")

</div>

Hi, I am using RAL with a frontdoor sequence for accesses over JTAG. In one TC I am blocking the DUT queue on purpose and trigger a ral.jtag\_read() expecting a timeout. After this point I am not able to use the frontd…

---

## [Is phase\_timeout in UVM (specified using set\_global\_timeout) per sub-phase of run\_phase or together?](https://verificationacademy.com/forums/t/is-phase-timeout-in-uvm-specified-using-set-global-timeout-per-sub-phase-of-run-phase-or-together/31034)

<div class="topic-metadata">

**Author:** [@rmozhiku](https://verificationacademy.com/forums/u/rmozhiku)\
**Replies:** 2\
**Last updated:** [October 12, 2015, 4:33am UTC](https://verificationacademy.com/forums/t/is-phase-timeout-in-uvm-specified-using-set-global-timeout-per-sub-phase-of-run-phase-or-together/31034 "2015-10-12T04:33:02Z")

</div>

It is not clear to me from userguide/cookbook as to whether the phase\_timeout is for the full run\_phase? Or is there a way to control phase\_timeout per sub\_phase of run\_phase?
