# \#RTL

**URL:** https://verificationacademy.com/forums/tag/rtl/4984.md

[Latest](https://verificationacademy.com/forums/latest.md) · [Categories](https://verificationacademy.com/forums/categories.md) · [Tags](https://verificationacademy.com/forums/tags.md)

---

## [How to access a changing RTL path?](https://verificationacademy.com/forums/t/how-to-access-a-changing-rtl-path/42463)

<div class="topic-metadata">

**Author:** [@Mark\_128](https://verificationacademy.com/forums/u/Mark_128)\
**Replies:** 9\
**Last updated:** [September 27, 2023, 11:57pm UTC](https://verificationacademy.com/forums/t/how-to-access-a-changing-rtl-path/42463 "2023-09-27T23:57:41Z")

</div>

Hi, I want to get a value from an internal RTL signal. The name of one of the module in the hierarchy keeps changing with every simulation run. So how do I get the hierarchy name correct every time. For example I want …

---

## [A simple assertion; req implies ack; does not fail](https://verificationacademy.com/forums/t/a-simple-assertion-req-implies-ack-does-not-fail/40565)

<div class="topic-metadata">

**Author:** [@ashokmehta72](https://verificationacademy.com/forums/u/ashokmehta72)\
**Replies:** 13\
**Last updated:** [June 24, 2022, 10:07pm UTC](https://verificationacademy.com/forums/t/a-simple-assertion-req-implies-ack-does-not-fail/40565 "2022-06-24T22:07:50Z")

</div>

Hello, I have a simple assertion as follows: $rose(req) |=\> !req\[\*1:10\] until ack ##1 !ack; On detection of $rose(req), I check to see that !req consecutively remains low -until- ack is true. Once ack is true, it shou…

---

## [A grant must at some time have been preceded by a request](https://verificationacademy.com/forums/t/a-grant-must-at-some-time-have-been-preceded-by-a-request/40033)

<div class="topic-metadata">

**Author:** [@ashokmehta72](https://verificationacademy.com/forums/u/ashokmehta72)\
**Replies:** 9\
**Last updated:** [May 29, 2022, 5:56am UTC](https://verificationacademy.com/forums/t/a-grant-must-at-some-time-have-been-preceded-by-a-request/40033 "2022-05-29T05:56:39Z")

</div>

I have a simple spec “A grant must at some time have been preceded by a request” If grant arrives and request never arrives before grant, the assertion fails. Need to look in the past for request, but would not know whe…

---

## [Blocking vs. Non-blocking](https://verificationacademy.com/forums/t/blocking-vs-non-blocking/39963)

<div class="topic-metadata">

**Author:** [@ashokmehta72](https://verificationacademy.com/forums/u/ashokmehta72)\
**Replies:** 1\
**Last updated:** [January 13, 2022, 3:28am UTC](https://verificationacademy.com/forums/t/blocking-vs-non-blocking/39963 "2022-01-13T03:28:20Z")

</div>

The following behavior of blocking vs. non-blocking stumps me. Non-blocking event triggers when I don’t expect it to. And Blocking event does not trigger when I expect it to. Here’s the EDA playground link. Questions ar…

---

## [Continuous assignment](https://verificationacademy.com/forums/t/continuous-assignment/39861)

<div class="topic-metadata">

**Author:** [@ashokmehta72](https://verificationacademy.com/forums/u/ashokmehta72)\
**Replies:** 2\
**Last updated:** [December 2, 2021, 7:19pm UTC](https://verificationacademy.com/forums/t/continuous-assignment/39861 "2021-12-02T19:19:25Z")

</div>

Hello, A bit rusty on Verilog. It’s been a while. Came across the following in a RAM model. assign data = (!nCS && !nOE) ? mem\[address\] : 32’bZ; As I know, Continuous assign gets evaluated every time any of the varia…

---

## [Synthesis of Integer](https://verificationacademy.com/forums/t/synthesis-of-integer/39642)

<div class="topic-metadata">

**Author:** [@ashokmehta72](https://verificationacademy.com/forums/u/ashokmehta72)\
**Replies:** 1\
**Last updated:** [October 1, 2021, 7:58pm UTC](https://verificationacademy.com/forums/t/synthesis-of-integer/39642 "2021-10-01T19:58:21Z")

</div>

Hello, I understand that it’s not a good idea to use integers in RTL that is to be synthesized. In the following code, it will generate 32 bit incrementor. But my question is on the continuous assignment. integer I; a…

---

## [What kind of challenges should I anticipate from a design verification perspective when simulating RTL from different vendors](https://verificationacademy.com/forums/t/what-kind-of-challenges-should-i-anticipate-from-a-design-verification-perspective-when-simulating-rtl-from-different-vendors/37383)

<div class="topic-metadata">

**Author:** [@GC](https://verificationacademy.com/forums/u/GC)\
**Replies:** 1\
**Last updated:** [June 17, 2020, 12:16am UTC](https://verificationacademy.com/forums/t/what-kind-of-challenges-should-i-anticipate-from-a-design-verification-perspective-when-simulating-rtl-from-different-vendors/37383 "2020-06-17T00:16:43Z")

</div>

What kind of challenges should I anticipate from a design verification perspective when simulating RTL from different vendors

---

## [How to make some registers of DUT as not Accessible to the customer](https://verificationacademy.com/forums/t/how-to-make-some-registers-of-dut-as-not-accessible-to-the-customer/32540)

<div class="topic-metadata">

**Author:** [@shreemant.vats](https://verificationacademy.com/forums/u/shreemant.vats)\
**Replies:** 3\
**Last updated:** [November 14, 2016, 12:52pm UTC](https://verificationacademy.com/forums/t/how-to-make-some-registers-of-dut-as-not-accessible-to-the-customer/32540 "2016-11-14T12:52:55Z")

</div>

Hello Dave, In Our DUT we don’t want the customer to have access to certain registers, even though they are RW registers at the RTL level but customer should not be able to Write into those registers. So in RAL is any f…

---

## [UVM for ESL DUT verification](https://verificationacademy.com/forums/t/uvm-for-esl-dut-verification/30185)

<div class="topic-metadata">

**Author:** [@evilpascal](https://verificationacademy.com/forums/u/evilpascal)\
**Replies:** 0\
**Last updated:** [November 28, 2014, 8:38pm UTC](https://verificationacademy.com/forums/t/uvm-for-esl-dut-verification/30185 "2014-11-28T20:38:57Z")

</div>

Hello all, How would one go about leveraging UVM for ES level DUT verification? Most of the stuff from RTL still applies but how do we correctly use the driver and monitor if the DUT does not have signals, but has TLM p…
