# \#HDL-designer-systemverilog-interface

**URL:** https://verificationacademy.com/forums/tag/hdl-designer-systemverilog-interface/4740.md

[Latest](https://verificationacademy.com/forums/latest.md) · [Categories](https://verificationacademy.com/forums/categories.md) · [Tags](https://verificationacademy.com/forums/tags.md)

---

## [Achieving time synchronization between C and HDL](https://verificationacademy.com/forums/t/achieving-time-synchronization-between-c-and-hdl/38442)

<div class="topic-metadata">

**Author:** [@kautilya87](https://verificationacademy.com/forums/u/kautilya87)\
**Replies:** 2\
**Last updated:** [December 9, 2020, 10:14am UTC](https://verificationacademy.com/forums/t/achieving-time-synchronization-between-c-and-hdl/38442 "2020-12-09T10:14:51Z")

</div>

Hi, I am trying to implement C-SV synchronization via DPI to perform vector matching against the RTL in simulation time. The C Model generates a set of output vectors, which is intended to be matched against the RTL ou…

---

## [SystemVerilog Interface Syntesis](https://verificationacademy.com/forums/t/systemverilog-interface-syntesis/36823)

<div class="topic-metadata">

**Author:** [@ghertz](https://verificationacademy.com/forums/u/ghertz)\
**Replies:** 7\
**Last updated:** [November 22, 2019, 6:19pm UTC](https://verificationacademy.com/forums/t/systemverilog-interface-syntesis/36823 "2019-11-22T18:19:13Z")

</div>

Can I synthesis a top level module that has interfaces ? I’m confused because of the information I found in this link: systemVerilog - modelsim Altera starter - uses of interfaces · Issue #564 · cocotb/cocotb · GitHub H…

---

## [Interface access for a Subsystem Block](https://verificationacademy.com/forums/t/interface-access-for-a-subsystem-block/35225)

<div class="topic-metadata">

**Author:** [@ravi.gupta](https://verificationacademy.com/forums/u/ravi.gupta)\
**Replies:** 2\
**Last updated:** [October 26, 2018, 9:00am UTC](https://verificationacademy.com/forums/t/interface-access-for-a-subsystem-block/35225 "2018-10-26T09:00:33Z")

</div>

Hi all, For the below code, as my Digital Top does not have AHB signals but the 2 subsystem blocks acore and peri\_top uses AHB, How do we drive those in our UVM Environment as the interface file shall only contain digit…

---

## [Interface defination override in instatiation](https://verificationacademy.com/forums/t/interface-defination-override-in-instatiation/30612)

<div class="topic-metadata">

**Author:** [@skumarsamal](https://verificationacademy.com/forums/u/skumarsamal)\
**Replies:** 1\
**Last updated:** [May 5, 2015, 3:56pm UTC](https://verificationacademy.com/forums/t/interface-defination-override-in-instatiation/30612 "2015-05-05T15:56:47Z")

</div>

I have BFM interaface which is parametrized interface which takes clk and reset as parameter , for ex: interface aa(clk,reset) , But during instantiation , I wan to instantiated it without passing clk and reset as para…

---

## [Does Mentor "HDL designer" support systemverilog "interface" construct?](https://verificationacademy.com/forums/t/does-mentor-hdl-designer-support-systemverilog-interface-construct/29657)

<div class="topic-metadata">

**Author:** [@dario.dellaquia](https://verificationacademy.com/forums/u/dario.dellaquia)\
**Replies:** 2\
**Last updated:** [July 1, 2014, 1:42pm UTC](https://verificationacademy.com/forums/t/does-mentor-hdl-designer-support-systemverilog-interface-construct/29657 "2014-07-01T13:42:00Z")

</div>

Hi, we are about to perform design partition for verification activity. We would like to create wrappers around VHDL blocks and connect them using systemverilog interfaces. In this way it is simpler to access signals, …
