# \#FPGA

**URL:** https://verificationacademy.com/forums/tag/fpga/7253.md

[Latest](https://verificationacademy.com/forums/latest.md) · [Categories](https://verificationacademy.com/forums/categories.md) · [Tags](https://verificationacademy.com/forums/tags.md)

---

## [Clocking Block default output skew not applied to output signal in Vivado Simulator 2018.x](https://verificationacademy.com/forums/t/clocking-block-default-output-skew-not-applied-to-output-signal-in-vivado-simulator-2018-x/51720)

<div class="topic-metadata">

**Author:** [@m.sheharyar\_00](https://verificationacademy.com/forums/u/m.sheharyar_00)\
**Replies:** 2\
**Last updated:** [August 29, 2026, 12:00pm UTC](https://verificationacademy.com/forums/t/clocking-block-default-output-skew-not-applied-to-output-signal-in-vivado-simulator-2018-x/51720 "2026-08-29T12:00:57Z")

</div>

clocking cb @(posedge clk); default output #2ns; output #3ns read; output #3ns write; output #3ns addr; output data\_in; input data\_out; endclocking Expected behavior: data\_in should inherit the default output ske…

---

## [Indexing an array through an enum datatype](https://verificationacademy.com/forums/t/indexing-an-array-through-an-enum-datatype/37386)

<div class="topic-metadata">

**Author:** [@kb646bits](https://verificationacademy.com/forums/u/kb646bits)\
**Replies:** 1\
**Last updated:** [April 1, 2020, 8:35pm UTC](https://verificationacademy.com/forums/t/indexing-an-array-through-an-enum-datatype/37386 "2020-04-01T20:35:56Z")

</div>

I am facing an issue while trying to create a lookup table. The current way I am doing is: I have an enum and creating a LUT using an array created via localparam: enum {Index\_0, Index\_1, Index\_2} index\_t; logic {7:0\] …

---

## [SystemVerilog "Lock up" on FPGA](https://verificationacademy.com/forums/t/systemverilog-lock-up-on-fpga/37246)

<div class="topic-metadata">

**Author:** [@SparkyNZ](https://verificationacademy.com/forums/u/SparkyNZ)\
**Replies:** 1\
**Last updated:** [March 3, 2020, 2:03am UTC](https://verificationacademy.com/forums/t/systemverilog-lock-up-on-fpga/37246 "2020-03-03T02:03:08Z")

</div>

I have a lock-up problem with my UART receiver project. For each character received I go through 4 states RX\_IDLE, RX\_GETSTART, RX\_GETDATA and RX\_STOP. The RX\_IDLE state waits for the incoming signal to fall from high to…
