# Problem with waveforms

**URL:** <https://verificationacademy.com/forums/t/problem-with-waveforms/32052>\
**Category:** UVM\
**Tags:** UVM, simulation-performance, waveform, Cadence, time\
**Created:** [July 19, 2016, 6:19am UTC](https://verificationacademy.com/forums/t/problem-with-waveforms/32052 "2016-07-19T06:19:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![RenéPi](https://verificationacademy.com/forums/letter_avatar_proxy/v4/letter/r/e47c2d/32.png) [@RenéPi](https://verificationacademy.com/forums/u/Ren%C3%A9Pi)\
**Post date:** [July 19, 2016, 6:19am UTC](https://verificationacademy.com/forums/t/problem-with-waveforms/32052/1 "2016-07-19T06:19:41Z")

</div>

Hello,

is there anyone else who has experienced problems with UVM using Candence SimVision waveforms?

I have run the simulation for only like **600ns** with **5 byte variables** and if I expand them to show all values it takes a **long time to visualize it graphically**.

Also if I want to move back and forth in time I need to **wait several seconds** until anything happens!

This makes working with it **not really useful** as it takes so long.

Could you please help me what’s the reason for this lag in time? Right now the simulation time is pretty low and also just a few variables. So what would happen if I add more variables and increase the simulation time to milliseconds, I think then nothing would react anymore because it takes too Long to update the waveform?

Thanks a lot in advance and Kind regards,  
René

---

<div class="post-metadata">

**Author:** ![user60](https://verificationacademy.com/forums/user_avatar/verificationacademy.com/user60/32/1096_2.png) [@user60](https://verificationacademy.com/forums/u/user60)\
**Post date:** [July 19, 2016, 6:46am UTC](https://verificationacademy.com/forums/t/problem-with-waveforms/32052/2 "2016-07-19T06:46:58Z")

</div>

_In reply to [RenéPi](https://verificationacademy.com/forums/t/problem-with-waveforms/32052):_

Since this is Mentor specific forum, avoid other vendor/tool issues. Your bets is to ask the same at [support.cadence.com](http://support.cadence.com)

Good Luck  
Srini  
[www.go2uvm.org](http://www.go2uvm.org)
