# Assert Property vs Cover Property

**URL:** <https://verificationacademy.com/forums/t/assert-property-vs-cover-property/30475>\
**Category:** SystemVerilog\
**Tags:** SystemVerilog\
**Created:** [March 18, 2015, 5:16pm UTC](https://verificationacademy.com/forums/t/assert-property-vs-cover-property/30475 "2015-03-18T17:16:51Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![ldmldm](https://verificationacademy.com/forums/letter_avatar_proxy/v4/letter/l/ea5d25/32.png) [@ldmldm](https://verificationacademy.com/forums/u/ldmldm)\
**Post date:** [March 18, 2015, 8:23pm UTC](https://verificationacademy.com/forums/t/assert-property-vs-cover-property/30475/3 "2015-03-18T20:23:17Z")

</div>

_In reply to [cool\_cake20](https://verificationacademy.com/forums/t/assert-property-vs-cover-property/30475/2):_

If so, why not _always_ to use both of them? ‘assert’ will check a failure of the rule/property, ‘cover’ will check whether the rule/property was ever fulfilled…

For example:

```verilog
 sequence s;
    @(posedge clk) a ##1 b;
  endsequence

  property p;
    a |-> s;
  endproperty

  assert property (p);
  cover property (p);

```

---

_[View the full topic](https://verificationacademy.com/forums/t/assert-property-vs-cover-property/30475)._
